Black F1ultralight Camera Strap by Simplr

If the F1 had a mutant superhero baby, it would be the F1ultralight.

Combine the F1’s expedition-grade construction, quick-adjustment tab, and streamlined design — with even more breathtaking lightness and slimmer proportions — and you’ve got the featherweight champion of camera straps.

With durable 3/4″ wide webbing and tiny-but-tough acetal hardware, the F1ultralight is strong where it counts. More importantly, it’s small where counts — especially near your hand where it matters most. With zero extra bulk, and sleek lug mount attachment, it’s about as close as you can get to holding a naked camera.

As the smallest cameras inherit the capabilities of their larger brethren (like the Fujifilm X100 and Sony RX1R series), so too should your camera strap — and that’s exactly what Simplr did with the F1ultralight.

Overview
Functionally, the F1ultralight is the same as the acclaimed F1 — streamlined, easy to adjust, and plenty strong — with a couple key differences…

One: The F1ultralight is slimmer than the F1, by a lot. On paper, the difference between 3/4″ (19mm) and 1″ (25.4mm) wide webbing might not sound that big, but it is — and the hardware is smaller too. The sum of the F1ultralight’s parts is significantly more compact, even though the length and range of adjustment are practically the same.

With very small cameras, there’s no appreciable difference in comfort (we recommend the F1ultralight for cameras up to 1.5lb [.68kg] even though it’s fully-capable of supporting much more), but you may find an F1 more comfortable on bigger cameras (wider webbing distributes weight across a larger area).

Two: The F1ultralight employs a handy “rip cord” which can be used to form a lanyard/long wrist strap (or fold the strap neatly for storage) — whereas on the F1, the webbing can be looped through the D-rings to form a wrist strap.

• Best for: Small Mirrorless Camera, Micro Four-Thirds Camera, Compact Camera, Point & Shoot Camera
• Tensile Strength: 80lbs (36kg)
• Ideal Load: 1.5lbs (.68kg) or less
• Connection Style: Fixed
• Connection: Lug Mount
• Connector(s): Lug Mount: Steel/Magnesium Alloy Split-Rings
• Length: Adjustable from 35"–55" (88.9cm–139.7cm)
• Width: .75" (20mm)
• Weight: 1oz (25g)
• Fabrication: Mil-Spec Nylon Webbing, Heavy-Duty Acetal Hardware, UV-Resistant 100% Polyester Thread, 95# Type-1 Paracord
• Construction: High-Strength Bartack Stitching
• Origin: Made in USA from Domestic and Imported Materials