Short Black Leather Rolleiflex Camera Strap by Cam-in

• Short strap suitable for hand carrying.
• Black genuine Italian leather.
• Chain-style leather feels soft and comfortable in your hand.
• Dimensions: 34cm long, 2.3cm wide (max), 0.8cm thick (max)*
• Suitable for the following camera models: 3.5F / 3.5E / 3.5E1 / 3.5E3 / 3.5T / 3.5C / 2.8F / 2.8E / 2.8E2 / 2.8FX / FX4.0 / 55F4 / 135F4
• Also available in brown, see related products.

Notes

I do not have a large amount of knowledge regarding Rolleiflex cameras and do not have any in the office to test these straps on. As such, the compatibility list should not be considered all that it will work with, it's likely that there are other models that are appropriate for this strap, but are not listed.

The leather is pretty soft when you first receive it, but it will need a little time to break in and soften further as it's around 3-4mm thick. Being that little bit thicker than most straps means it should also be a bit longer lasting. In terms of maintenance it doesn't need much, but depending on how often you use the strap you might want to give it a rub with some leather conditioner every few months, especially if the strap has been wet.

* Dimensions were measured from the widest and thicket part of each chain link. The length is from the middle of the metal part on one end to the other. The strap will stretch slightly when weight is applied.